Road / gravel
Reid Tanami 2
E-bike specs from bikesonline.com.au (checked 2026-10-19): 250 W rated · 40 Nm · 352 Wh battery. Price seen in that listing: A$2,799.99 — prices change, check with the seller. Listing note: 250 W pedelec (BikesOnline AU); assist cut-off not shown – confirm EN 15194 label (sale price, was $3,799.99) Pre-mapped from published specs, not yet checked against the bike. Source: https://www.bikesonline.com.au/products/reid-tanami-2-electric-gravel-bike
- Road / gravel
- Rear hub · 40 Nm
- 352 Wh
Specs don’t settle it — the maker doesn’t publish both rated power and assist speed. Check the label on the bike or run the legal check.
Specifications
Motor
| Motor | Ananda R400 rear hub |
|---|---|
| Position | Rear hub |
| Rated power | 250 W |
| Torque | 40 Nm |
Battery
| Capacity | 352 Wh |
|---|
Performance & road rules
| Class | 25 km/h pedelec |
|---|
Frame & wheels
| Style | Road / gravel |
|---|
Manufacturer specifications Collected from Australian retailer and maker pages (linked below); not yet checked against the bike by our team. Specs change between model years and markets — confirm with the maker before you buy.
Quick answers
Is the Reid Tanami 2 legal in Australia?
Its rated power is listed as 250 W (within the 250 W limit), but the maker’s published specs don’t confirm the other limit. A legal pedal-assist e-bike has at most 250 W rated power and stops assisting at 25 km/h. In Queensland it also needs an EN 15194 (or Legacy EPAC) compliance label to be ridden in public from 1 March 2027 — check the frame for the sticker.
What is the real-world range of the Reid Tanami 2?
EbikeMate estimates about 20–30 km per charge from its 352 Wh battery, for an 80 kg rider on rolling terrain in a middle assist level at about 20 km/h. Hills, headwinds, cold weather and higher assist cut range.
How big is the Reid Tanami 2 battery?
352 Wh. Use only the original or a maker-approved battery and charger.
What motor does the Reid Tanami 2 have?
A Ananda R400 rear hub rear hub motor with 40 Nm of torque, rated at 250 W.
Has the Reid Tanami 2 been recalled?
No recall for the Reid Tanami 2 is listed in the EbikeMate Recall Centre, which tracks Product Safety Australia and maker notices. Registered owners are emailed if one is published.
Check your own e-bike against your state’s rules → · See road-legal models →
Specification sources
Manufacturer specificationsThese specifications came from a maker or retailer page but we don’t have the link on file. Check them with the maker before relying on them.
Specs change between model years and markets. Your bike’s own labels (battery Wh and V, motor rating, compliance sticker) are what count.
Recalls
Government informationNo recalls for the Reid Tanami 2 in the EbikeMate Recall Centre, which we build from Product Safety Australia and maker notices. Registered owners are emailed if one is published.
Australian rules
Government informationEbikeMate editorial guidanceAcross Australia a pedal-assisted e-bike (EN 15194) may have up to 250 W continuous rated power, with assistance cutting out by 25 km/h. Throttle rules differ by state. What the maker states for this model:
- Rated power: 250 W — within the 250 W limit
- Assistance to: not stated by the source
- Throttle: not stated
Check my e-bike against my state’s rulesGuidance, not legal advice. Rules and official links are on the checker.
From bike shops
Shop-verified informationNot enough shop records yet. We show shop-measured figures once at least 3 records exist for this model.
From owners
Aggregated owner informationFewer than 5 Reid Tanami 2s are registered so far, so we don’t show owner figures yet.
Issues owners have reported
No issue has been reported by 3 or more different owners yet.
Own one? Create your free Bike Passport, then you can report issues with your model.
Used prices
Not enough used ads yet — we show a range once there are 5 or more in a year.
Owning one
EbikeMate editorial guidanceReal-world range
20–30 km
Our estimate for an 80 kg rider on rolling terrain in medium assist at about 20 km/h, with a healthy battery. Hills, wind, cold, high assist and speed cut it a lot.
Work out my rangeBattery and charger
- Use the maker’s own replacement battery, or one the maker or a specialist confirms is approved for this motor system. Voltage, connector and battery-management system all have to match.
- Use the original charger, or one the maker approves for this battery. Never use a charger with a different output, even if the plug fits.
- Check the battery’s own label (Wh, V and serial) matches what the seller says.
- Damaged, swollen, hot or smelly batteries: stop using them, keep them outside away from anything that can burn, and take them to a battery drop-off — never household bins.
Servicing
- A first check after the first few hundred kilometres — new cables stretch and bolts settle.
- Chain: clean and lube regularly and measure wear — e-bikes wear chains and cassettes faster than regular bikes.
- Brakes: check pads and cable tension often — the extra weight and speed wear them faster.
- Hub motor: check the axle nuts or thru-axle and torque arms, and that the motor cable isn’t pinched or rubbing.
- Battery: keep it between 20% and 80% for daily use, store it at about half charge, and keep it out of hot cars.
Buying a used one
- Run the serial through the free EbikeMate buyer check — theft status, recalls and ownership on record.
- Find the frame serial yourself (usually under the bottom bracket) and check it matches the seller’s papers.
- Ask how old the battery is and check it holds charge on a test ride up a hill.
- Look for signs of derestriction: tuning dongles, unusual wiring, or a top assisted speed above 25 km/h on the display.
- Ask for the receipt, the original charger and the key for the battery lock.
Parts known to fit the Reid Tanami 2
Pre-mapped from the maker’s and retailers’ published part pages. Riders and shops confirm or flag each one — “confirmed” shows only once someone has. Check the part number and connector against your old part before you buy — versions change between model years.
Batteries 2
-
Reid Integrated battery (OEM)
352Wh
Maker product page states this part is fitted as standard
Pre-mapped, not yet checked · source reidcycles.com.au (seen 19 Oct 2026)
-
Downtube Internal, 36V, 9.8Ah, 352Wh, EN50604 / UL2271 Certified
352 Wh; 36 V; 9.8 Ah
Pre-mapped, not yet checked · source bikesonline.com.au (seen 19 Oct 2026)
Displays 1
-
Top Tube Integrated Display with Function Button, Battery Indicator and Power Control
display
Pre-mapped, not yet checked · source bikesonline.com.au (seen 19 Oct 2026)
Motors 2
-
Ananda rear hub motor
250W, 40Nm
Maker product page states this part is fitted as standard
Pre-mapped, not yet checked · source reidcycles.com.au (seen 19 Oct 2026)
-
Ananda R400, 36V, 250W, 40Nm Rear Hub Motor
Pre-mapped, not yet checked · source bikesonline.com.au (seen 19 Oct 2026)
Brakes 1
-
Shimano CUES U6030 Hydraulic Disc
front and rear
Pre-mapped, not yet checked · source bikesonline.com.au (seen 19 Oct 2026)
Brake rotors 1
-
160mm
160 mm (front/rear not specified)
Pre-mapped, not yet checked · source bikesonline.com.au (seen 19 Oct 2026)
Tyres 2
-
WTB Riddler
45mm
Maker product page states this part is fitted as standard
Pre-mapped, not yet checked · source reidcycles.com.au (seen 19 Oct 2026)
-
WTB Riddler, 700 × 45C, 60TPI, Tan Wall, Tubeless Compatible
front and rear; size 700x45C
Pre-mapped, not yet checked · source bikesonline.com.au (seen 19 Oct 2026)
Wheels 1
-
WTB ST i25 TCS, 700c, 32H, Tubeless Compatible
rims
Pre-mapped, not yet checked · source bikesonline.com.au (seen 19 Oct 2026)
Gears and drivetrain 3
-
KMC eGlide, 10-Speed
chain
Pre-mapped, not yet checked · source bikesonline.com.au (seen 19 Oct 2026)
-
Shimano CUES U6000, 10-Speed
rear derailleur
Pre-mapped, not yet checked · source bikesonline.com.au (seen 19 Oct 2026)
-
Shimano LG300, 10-Speed, 11–48T
cassette/freewheel
Pre-mapped, not yet checked · source bikesonline.com.au (seen 19 Oct 2026)
Cassettes 1
-
Shimano CUES 10-speed cassette
11-48T
Maker product page states this part is fitted as standard
Pre-mapped, not yet checked · source reidcycles.com.au (seen 19 Oct 2026)
Sign in to confirm a fit or add a part you’ve fitted.
Tanami 2 for sale
Parts for the Tanami 2
All parts →Thinking of buying a Reid Tanami 2?
Ask shops near you that sell Reid about price, stock and a test ride — one request, up to 5 shops. Free, no obligation.
Own a Reid Tanami 2?
Give it a free Bike Passport — its serial, photos and receipt in one private record, ready if it’s ever stolen or when you sell.
Where’s the serial? Usually under the bottom bracket, where the cranks meet the frame. More help finding it
Similar e-bikes
-
Bianchi
E-Oltre Ultegra Di2
Within 250 W · 25 km/h
- Road / gravel
-
Cube
Nuroad Hybrid C:62 Race 400X
- Road / gravel
- Mid-drive · 60 Nm
- 400 Wh
-
Fiido
Air
Within 250 W · 25 km/h
- Road / gravel
- 209 Wh
- 13.7 kg
-
Giant
Defy Advanced E+ Elite 0
- Road / gravel
- Mid-drive · 30 Nm
- 400 Wh
-
Giant
Defy Advanced E+ Elite 1
- Road / gravel
- Mid-drive · 30 Nm
- 400 Wh
-
Giant
Defy Advanced E+ Elite 2
- Road / gravel
- Mid-drive · 30 Nm
- 400 Wh